View STI30NM60ND_4975616.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

STx30NM60ND
N-channel 600 V, 0.11 , 25 A FDmeshTM II Power MOSFET (with fast diode) TO-220, TO-220FP, D2PAK, I2PAK, TO-247
Features
Type STB30NM60ND STI30NM60ND STF30NM60ND STP30NM60ND STW30NM60ND VDSS @TJ max RDS(on) max ID 25 A 25 A 25 A(1) 25 A 25 A
I PAK
2
3 12
2
3
TO-247
3
1
650 V
0.13
D PAK
2
1
1. Limited only by maximum temperature allowed
3
The world's best RDS(on) in TO-220 amongst the fast recovery diode devices 100% avalanche tested Low input capacitance and gate charge Low gate input resistance Extremely high dv/dt and avalanche capabilities
TO-220
1
2
3
TO-220FP
1
2
Figure 1.
Internal schematic diagram
Application
Switching applications
Description
The FDmeshTM II series belongs to the second generation of MDmeshTM technology. This revolutionary Power MOSFET associates a new vertical structure to the company's strip layout and associates all advantages of reduced onresistance and fast switching with an intrinsic fastrecovery body diode. Table 1. Device summary
Marking 30NM60ND 30NM60ND 30NM60ND 30NM60ND 30NM60ND Package DPAK IPAK TO-220FP TO-220 TO-247 Packaging Tape and reel Tube Tube Tube Tube
It is therefore strongly recommended for bridge topologies, in particular ZVS phase-shift converters.
Order codes STB30NM60ND STI30NM60ND STF30NM60ND STP30NM60ND STW30NM60ND
November 2008
Rev 2
1/18
www.st.com 18
Contents
STx30NM60ND
Contents
1 2 Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
2.1 Electrical characteristics (curves) ............................. 6
3 4 5 6
Test circuits
.............................................. 9
Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Packing mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
2/18
STx30NM60ND
Electrical ratings
1
Electrical ratings
Table 2.
Symbol
Absolute maximum ratings
Value Parameter TO-220/D2PAK I2PAK / TO-247 600 25 25 15.8 100 190 40 -- 55 to 150 C Max. operating junction temperature 150 2500 25
(1)
Unit TO-220FP V V A A A W V/ns V
VDS VGS ID ID IDM
(2)
Drain-source voltage (VGS = 0) Gate- source voltage Drain current (continuous) at TC = 25 C Drain current (continuous) at TC = 100 C Drain current (pulsed) Total dissipation at TC = 25 C Peak diode recovery voltage slope Insulation withstand voltage (RMS) from all three leads to external heat sink (t = 1 s; TC = 25 C) Storage temperature
15.8(1) 100(1) 40
PTOT dv/dt
(3)
VISO Tstg TJ
1. Limited only by maximum temperature allowed 2. Pulse width limited by safe operating area 3. ISD 25 A, di/dt 600 A/s, VDD = 80% V(BR)DSS
Table 3.
Symbol Rthj-case Rthj-amb Rthj-pcb Tl
Thermal data
Parameter Thermal resistance junction-case max Thermal resistance junction-ambient max Thermal resistance junction-pcb max Maximum lead temperature for soldering purpose -62.5 -TO-220 IPAK TO-247 DPAK TO-220FP 3.1 50 -300 -30 62.5 -Unit C/W C/W C/W C
0.66
Table 4.
Symbol IAR EAS
Avalanche characteristics
Parameter Avalanche current, repetitive or notrepetitive (pulse width limited by TJ max) Single pulse avalanche energy (starting TJ = 25 C, ID = IAR, VDD = 50 V) Max value 12 900 Unit A mJ
3/18
Electrical characteristics
STx30NM60ND
2
Electrical characteristics
(TCASE = 25 C unless otherwise specified) Table 5.
Symbol
On/off states
Value Parameter Drain-source breakdown voltage Drain source voltage slope Zero gate voltage drain current (VGS = 0) Gate-body leakage current (VDS = 0) Gate threshold voltage Static drain-source on resistance Test conditions Min. Typ. Max. V 48 1 100 100 3 4 0.11 5 0.13 V/ns A A nA V Unit
V(BR)DSS dv/dt(1) IDSS IGSS VGS(th) RDS(on)
ID = 1 mA, VGS = 0 VDD= 480 V, ID= 25 A, VGS= 10 V VDS = Max rating VDS = Max rating @125 C VGS = 20 V VDS = VGS, ID = 250 A VGS = 10 V, ID = 12.5 A
600
1. Characteristic value at turn off on inductive load
Table 6.
Symbol gfs
(1)
Dynamic
Parameter Forward transconductance Input capacitance Output capacitance Reverse transfer capacitance Equivalent output capacitance Turn-on delay time Rise time Turn-off delay time Fall time Total gate charge Gate-source charge Gate-drain charge Gate input resistance Test conditions VDS = 15 V, ID = 12.5 A VDS = 50 V, f = 1 MHz, VGS = 0 Min. Typ. 25 2800 200 24 125 20 50 110 75 100 16 54 3.0 Max. Unit S pF pF pF
Ciss Coss Crss Coss eq.(2) td(on) tr td(off) tf Qg Qgs Qgd Rg
VGS = 0, VDS = 0 to 480 V VDD =300 V, ID = 12.5 A RG = 4.7 , VGS = 10 V (see Figure 23), (see Figure 18) VDD = 480 V, ID = 25 A, VGS = 10 V, (see Figure 19) f=1MHz Gate DC Bias=0 Test signal level=20 mV Open drain
pF ns ns ns ns nC nC nC
1. Pulsed: pulse duration=300 s, duty cycle 1.5% 2. Coss eq. is defined as a constant equivalent capacitance giving the same charging time as Coss when VDS increases from 0 to 80% VDSS
4/18
STx30NM60ND
Electrical characteristics
Table 7.
Symbol ISD ISDM (1) VSD (2) trr Qrr IRRM trr Qrr IRRM
Source drain diode
Parameter Source-drain current Source-drain current (pulsed) Forward on voltage Reverse recovery time Reverse recovery charge Reverse recovery current Reverse recovery time Reverse recovery charge Reverse recovery current ISD = 25 A, VGS = 0 ISD = 25 A, VDD = 60 V di/dt=100 A/s (see Figure 20) ISD = 25 A,VDD = 60 V di/dt=100 A/s, TJ = 150 C (see Figure 20) 170 1.2 15 250 2.5 20 Test conditions Min. Typ. Max. 25 100 1.6 Unit A A V ns C A ns C A
1. Pulse width limited by safe operating area 2. Pulsed: Pulse duration = 300 s, duty cycle 1.5%.
5/18
Electrical characteristics
STx30NM60ND
2.1
Figure 2.
Electrical characteristics (curves)
Safe operating area for TO-220 / DPAK / IPAK Figure 3. Thermal impedance for TO-220 / DPAK / IPAK
Figure 4.
Safe operating area for TO-220FP
Figure 5.
Thermal impedance for TO-220FP
Figure 6.
Safe operating area for TO-247
Figure 7.
Thermal impedance for TO-247
6/18
STx30NM60ND Figure 8.
ID(A) VGS=10V 30 25
5V
5
Electrical characteristics Figure 9.
AM00051v1
Output characteristics
Transfer characteristics
AM00052v1
ID(A)
4
20
3
15
2
10
1
5
4V
0
0
0
5
10
15
20
25
30 VSD(V)
0
2
4
6
8
VGS(V)
Figure 10. Transconductance
Gfs(S)
AM00048v1
Figure 11. Static drain-source on resistance
RDS(on) () 0.135
AM00046v1
30.5
TJ=-50C
25.5
25C
0.115
150C
20.5
0.095 VGS=10V ID=12.5A 0.055
15.5
0.075
10.5
5.5
0.035
0.5
0 5 10 15 20 25 30 ID(A)
0.015 0 5 10 15 20 25 30 ID(A)
Figure 12. Gate charge vs gate-source voltage Figure 13. Capacitance variations
AM00044v1
VGS(V) 12 10 8 6
AM00045v1
C(pF)
VDD=480V ID=25A
10000
Ciss
1000
100
Coss
4
Crss
2 0 0 20 40 60 80 100 Qg(nC)
10
1 0.1 1 10 100 VGS(V)
7/18
Electrical characteristics Figure 14. Normalized gate threshold voltage vs temperature
VGS(th)
(norm)
AM00043v1
STx30NM60ND Figure 15. Normalized on resistance vs temperature
RDS(on) (norm)
AM00047v1
1.1
ID=250A
2.1 1.9 1.7 1.5 1.3 1.1 0.9 0.7 0.5
1.05 1 0.95 0.9 0.85 0.8 0.75 0.7
-50
-25
0
25
50
75
100
125 TJ(C) 150
-50
-25
0
25
50
75
100
125
TJ(C) 150
Figure 16. Source-drain diode forward characteristics
VSD(V) 1 0.8 0.6 0.4 0.2 0 0 10 20
TJ=-50C
AM00050v1
Figure 17. Normalized BVDSS vs temperature
BVDSS
(norm)
AM00049v1
25C 150C
1.07 1.05 1.03 1.01 0.99 0.97 0.95 0.93
ISD(A)
-50
-25
0
25
50
75
100
125
150 TJ(C)
8/18
STx30NM60ND
Test circuits
3
Test circuits
Figure 19. Gate charge test circuit
Figure 18. Switching times test circuit for resistive load
Figure 20. Test circuit for inductive load Figure 21. Unclamped Inductive load test switching and diode recovery times circuit
Figure 22. Unclamped inductive waveform
Figure 23. Switching time waveform
9/18
Package mechanical data
STx30NM60ND
4
Package mechanical data
In order to meet environmental requirements, ST offers these devices in ECOPACK(R) packages. These packages have a lead-free second level interconnect. The category of second level interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an ST trademark. ECOPACK specifications are available at: www.st.com
10/18
STx30NM60ND
Package mechanical data
TO-220 mechanical data
mm Dim Min A b b1 c D D1 E e e1 F H1 J1 L L1 L20 L30 P Q 4.40 0.61 1.14 0.48 15.25 1.27 10 2.40 4.95 1.23 6.20 2.40 13 3.50 16.40 28.90 3.75 2.65 3.85 2.95 0.147 0.104 10.40 2.70 5.15 1.32 6.60 2.72 14 3.93 0.393 0.094 0.194 0.048 0.244 0.094 0.511 0.137 Typ Max 4.60 0.88 1.70 0.70 15.75 Min 0.173 0.024 0.044 0.019 0.6
inch Typ Max 0.181 0.034 0.066 0.027 0.62 0.050 0.409 0.106 0.202 0.051 0.256 0.107 0.551 0.154 0.645 1.137 0.151 0.116
11/18
Package mechanical data
STx30NM60ND
TO-220FP mechanical data
mm. Min. 4.4 2.5 2.5 0.45 0.75 1.15 1.15 4.95 2.4 10 16 28.6 9.8 2.9 15.9 9 3 30.6 10.6 3.6 16.4 9.3 3.2 1.126 .0385 0.114 0.626 0.354 0.118 Typ. Max. 4.6 2.7 2.75 0.7 1 1.7 1.7 5.2 2.7 10.4 Min. 0.173 0.098 0.098 0.017 0.030 0.045 0.045 0.195 0.094 0.393 0.630 1.204 0.417 0.141 0.645 0.366 0.126 inch Typ. Max. 0.181 0.106 0.108 0.027 0.039 0.067 0.067 0.204 0.106 0.409
DIM. A B D E F F1 F2 G G1 H L2 L3 L4 L5 L6 L7 O
A
B
L3 L6 L7
F1 F
D
G1
E H
F2
L2
L5
123
L4
12/18
G
STx30NM60ND
Package mechanical data
TO-262 (I2PAK) mechanical data
mm. DIM. Min. A A1 b b1 c c2 D e e1 E L L1 L2 4.40 2.40 0.61 1.14 0.49 1.23 8.95 2.40 4.95 10 13 3.50 1.27 Typ. Max. 4.60 2.72 0.88 1.70 0.70 1.32 9.35 2.70 5.15 10.40 14 3.93 1.40 Min. 0.173 0.094 0.024 0.044 0.019 0.048 0.352 0.094 0.194 0.393 0.511 0.137 0.050 Typ. Max. 0.181 0.107 0.034 0.066 0.027 0.052 0.368 0.106 0.202 0.410 0.551 0.154 0.055 inch
13/18
Package mechanical data
STx30NM60ND
DPAK (TO-263) mechanical data
mm Dim Min A A1 b b2 c c2 D D1 E E1 e e1 H J1 L L1 L2 R V2 4.40 0.03 0.70 1.14 0.45 1.23 8.95 7.50 10 8.50 2.54 4.88 15 2.49 2.29 1.27 1.30 0.4 0 8 0 5.28 15.85 2.69 2.79 1.40 1.75 0.192 0.590 0.099 0.090 0.05 0.051 Typ Max 4.60 0.23 0.93 1.70 0.60 1.36 9.35 10.40 Min 0.173 0.001 0.027 0.045 0.017 0.048 0.352 0.295 0.394 0.334
inch Typ Max 0.181 0.009 0.037 0.067 0.024 0.053 0.368 0.409 0.1 0.208 0.624 0.106 0.110 0.055 0.069 0.016 8
0079457_M
14/18
STx30NM60ND
Package mechanical data
TO-247 Mechanical data
mm. Min. 4.85 2.20 1.0 2.0 3.0 0.40 19.85 15.45 5.45 14.20 3.70 18.50 3.55 4.50 5.50 3.65 5.50 14.80 4.30 Typ Max. 5.15 2.60 1.40 2.40 3.40 0.80 20.15 15.75
Dim. A A1 b b1 b2 c D E e L L1 L2 oP oR S
15/18
Packing mechanical data
STx30NM60ND
5
Packing mechanical data
D2PAK FOOTPRINT
TAPE AND REEL SHIPMENT
REEL MECHANICAL DATA
DIM. A B C D G N T 1.5 12.8 20.2 24.4 100 30.4 26.4 13.2 mm MIN. MAX. 330 0.059 0.504 0.520 0795 0.960 1.039 3.937 1.197 BULK QTY 1000 inch MIN. MAX. 12.992
TAPE MECHANICAL DATA
DIM. A0 B0 D D1 E F K0 P0 P1 P2 R T W mm MIN. 10.5 15.7 1.5 1.59 1.65 11.4 4.8 3.9 11.9 1.9 50 0.25 23.7 24.3 MAX. 10.7 15.9 1.6 1.61 1.85 11.6 5.0 4.1 12.1 2.1 inch MIN. MAX. 0.413 0.421 0.618 0.626 0.059 0.063 0.062 0.063 0.065 0.073 0.449 0.456 0.189 0.197 0.153 0.161 0.468 0.476 0.075 0.082 1.574 0.35 0.0098 0.0137 0.933 0.956
BASE QTY 1000
* on sales type
16/18
STx30NM60ND
Revision history
6
Revision history
Table 8.
Date 29-Nov-2007 11-Nov-2008
Document revision history
Revision 1 2 initial release Document status promoted from preliminary data to datasheet. Changes
17/18
STx30NM60ND
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries ("ST") reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST's terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST'S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER'S OWN RISK.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
(c) 2008 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com
18/18

▲Up To Search▲

Price & Availability of STI30NM60ND

	To Download STI30NM60ND Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .